a very Cricut Christmas!

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

Alright alright alright! Christmas is almost here and it is time to finish up those DIY presents you thought were a really good idea about a month ago. For my work friends, I’m making personalized tumblers using my Cricut Explore Air 2!

Here’s what you need:

IMG_7351 2

Here we go:

First, get your design ready in Cricut’s Design Space. When it’s cut out, cut a piece of transfer tape to approximately the same size as your design.

IMG_7352 2

Remove the transfer tape and smooth it over the top of your vinyl design. Use the scraper that comes with your Cricut to help adhere the transfer tape to the vinyl.

Peel the excess vinyl away from the transfer tape, making sure that the design stays attached to the transfer tape. This can be done with your hands when you have a simple design but might need the weeding tools if the design is more complex.

IMG_7356

Your design will be the only thing left on the transfer tape!

IMG_7357 2

Carefully place your design on the tumbler and make sure that it is where you want it to be. When you have it in the correct place, smooth the design down with the scraper. Slowly peel the transfer paper back – the design should remain attached to the tumbler.

IMG_7358

For a fun extra touch, I add confetti to the inside of the tumbler and then tie a tulle bow around it. I’ll probably also put a hand cream or gift card in the tumbler too! It turned out super cute and was so easy!!

IMG_7361

Good luck!

xo, Rachel

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s